The Process

1. Measurements - make sure you have measured your space accurately as you will need to enter them during the buying process.

2. Choose your material - Go to the product page and decide which material suits your space the most.

3. Colour - If you have chosen a powder coated material you will need to look at our RAL colour chart to choose your colour and write down the code. The RAL colour chart will be available again during the buying process for your convenience.

4. Finish - If you have chosen a powder coated finish you will need to decide whether you would like a matt, silk or gloss finish, all of which are shown on our product page.

5. Drainage Holes or not ? - If you require indoor planters you will not require drainage holes but for outdoor planters you will.

During the buying process it is very simple to follow, this section is just to double check that you have made all your decisions before you buy.

Once you have made these decisions follow the simple steps on our online shop , fill in your payment details, the courier company will contact you in around a week to 2 weeks regarding your delivery, its that easy.

Once all of the dimensions have been worked out the first process is to cut the various components to the correct size. This is done on a guillotine which is extremely accurate.

When all the sheets are cut to there correct size, they need to be cropped to allow them to fit together after they are folded.

Folding is the third process, this is done on a CNC brake press. Once set the brake press can fold all the necessary folds in a short series of operations.

After the folding is completed the components are ready for welding (or riveting for galvanized material).

We take as much time as necessary at this stage, accurately clamping the planter in position to create a seamless finish.

Finally the weld is cleaned off and the it is prepared for its final finish to create a flawless hand made planter.